How do I draw up the bobbin thread on my janome 4400

Need a faster answer?
Make sure your bobbin is installed and threaded, and the needle is threaded. Raise the presser foot.

Then lightly hold the end of the top thread in your left hand and slowly rotate the handwheel toward you with your right hand. The needle will go down and it should come up with the bobbin thread. I use a stiletto, pencil, or something else to sweep under the presser foot so the bobbin thread comes up the rest of the way.
Was this answer helpful?
Yes
No
Thank you for your feedback!
Instant Technician Help
over the Phone or Video
Check Icon Get Instant Help
Check Icon Save hundreds of $$$
Check Icon Available 24/7