I have a Whirlpool Washing Machine, Ultimate Care II . The machine fills with water but, when it gets to the spin cycle it stops. Water will not pump out. Tried moving the dial to spin cycle, nothing

Need a faster answer?
it would seem that you have something blocking the water from being pumped out try blowing down the water outlet pipe to see if you can, its hard but should be possible if not then you have a blockage in the pump like a button or other debris out of your trouser pockets you will need to get to the pump to try and take the pipe off the pump to try and clear it or the pump is burnt out that means replace it you will find a replacement on the manufactures site good luck in your quest eric
Was this answer helpful?
Thank you for your feedback!