I what to know how to input simulation program to clear maintanance code CA on Mx2610 sharp copier

Need a faster answer?
1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key "*" key "C" key "*" key

Main code 14 Start key Sub code 0 Start key

OR

"#" key "INTERRUPT" key "C" key "INTERRUPT"

Main code 14 Start key Sub code 0 Start key

2. Canceling the simulation mode
When the clear all key is pressed, the simulation mode is cancelled.
When the

* After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.
Was this answer helpful?
Yes
No
Thank you for your feedback!